Send Email
Send SMS
Search
CoiNel Technology Solutions LLP
CoiNel Technology Solutions LLP


NXP ARM Cortex M3

To attain the maximum satisfaction of our clients, we are involved in offering supreme quality range of NXP ARM Cortex M3 as we are a leading manufacturer and supplier in this business. This product ranges is available in bulk.


Cortex-M3 LPC1768 Mini Development Board

REQUEST CALLBACK

Cortex-M3 LPC1768 Mini Development Board
Approx. Rs 2,500 / Piece
Get Best Quote

LPC176x Mini Board has an on board Cortex M3 core micro controller (LPC1768). This board has the connectivity options for Ethernet, USB Host, Serial, CAN, JTAG etc. IO pinout are also provided.

Kit Deliverable:

Note: JTAG Programmer/Debugger is not the part of the package and needs to be purchased separately.

LPC176x HPLUS Ex Features

  1. USB Device Connectivity.
  2. Ethernet with DP83848 PHY MAC.
  3. 2 x CAN
  4. RS232 Interface for UART0 and UART3
  5. Unused I/O pin outs.
  6. On Board Reset and ISP Switches.
  7. On Board Power Supply Circuit for +5V and +3.3V (USB or external Power Source input options)
  8. On Board 12 MHz Clock
  9. Option for a CMOS Battery.
  10. On board 20 pin JTAG connector for debugging/programming applications.
  11. LED for Power Supply, USB, Ethernet and Test LED.
  12. Board Dimensions: mm
  13. Board Specifications:
    1. Laminate: FR4
        • Board Thickness: 1.6mm
        • Finish: ENIG

Features of LPC1768

Best in class Cortex M3 Hardware.

  1. 100 MHz ARM Core with 64 KB of SRAM and 512 KB Flash.
  2. 8-channel general purpose DMA controller, 4 UARTs, 2 CAN channels, 2 SSP controllers, SPI interface, 3 I2C interfaces, 2-input plus 2-output I2S interface, 8-channel 12-bit ADC, 10-bit DAC, motor control PWM, Quadrature Encoder interface, 4 general purpose timers, 6-output general purpose PWM, ultra-low power RTC with separate battery supply, and up to 70 general purpose I/O pins.

JTAG Options for Debug/Programming:

Parallel Port JTAG (tested on Keil, Rowley Cross Works)

CoiNel ARM USB JTAG (tested on Keil, CooCox CoIDE, Rowley Cross Works)

CoiNel Co LinkEx (tested with Keil, CooCox CoIDE)

The Board can also be used with other JTAG Debuggers.

The details on how to use the JTAG and its associated plugins are provided with the documents and also can be downloaded from Download and Support sections.

ISP Programming:

Programming can be done through the on chip boot loader using UART interface (UART0). You will have to use a TTL to RS232 Converter to do so since the pinout are TTL logic and PC uses RS232 logic. The tool used for programming is Flash Magic

Programming using CoFlash

The controller can be Programmed using Co Flash from CooCox. The binary file needs to loaded using this tool. Check using CoFlash for more details.

To use CoFlash, you would need CoiNel ARM USB JTAG or CoiNel CoLinkEx Debuggers.

USB Boot Loader:

The Board can also be programmed via USB Secondary Bootloader. Check LPC1768 USB Boot Loader for more details.

TOOLS:

Our products can be used with majority of IDE and plugins that support CORTEX M3 LPC17xx family. A few IDE and plugin details are given below.

  • Keil uvision4 IDE (32K code limited version can be used.)
  • Rowley Cross works(30 day evaluation version can be used.)
  • IAR work bench (32K code limited version could be used.)
  • Coo Cox Coide (Unlimited, open source)
  • GCC based open source tool chains

Plugins/Programmers:

H-JTAG, CooCox Colink, Flash Magic have been tested.

Compatible debuggers like U-Link, J-Link etc can also be used.

Debugger/Programmer Options

  • CoiNel ARM USB JTAG.
  • CoiNel CooCox CoLinkEx.
  • Parallel Port Debugger.


Product Ordering Code: M3-MINI



Additional Information:

  • Item Code: M3-MINI
  • Minimum Order Quantity: 1 Piece
  • Port of Dispatch: DTDC,DHL,FedEx
  • Production Capacity: 100000
  • Packaging Details: 1. LPC1768Mini Board.

    2. USB Cable.

    3. CD Containing schematic, sample source codes, required software and reference documents.
Yes! I am interested

LPC1768 HPLUS Ex AIO

REQUEST CALLBACK

LPC1768 HPLUS Ex AIO
Approx. Rs 6,500 / Set(s)
Get Best Quote

LPC176x HPLUS Ex is All in One package that includes LPC176x HPLUS Ex Board, 3.2 inch TFT and a 128 x 64 Graphical LCD.LPC176x HPLUS Ex Board has an onboard Cortex M3 core micro controller (LPC1768). This board has connectivity options similar to that of HPLUS Board which include Micro SDCard, Ethernet, USB Host/Device, 3.2inch TFT connectivity option, JTAG etc. Along with these features, the Ex Board has additional features of two RS232 interface plus a connectivity option for 128x64 Graphical LCD.

The display connectivity options are available for the following display units.

Graphical LCD Connectivity:

  • Model: TM12864H6CCOWA
  • Driver IC: NT75451
  • Data Interface Parallel
  • Number of Pixels: 128 x 64

3.2inch TFT Connectivity:

  • Model: KWH032GM02-F05
  • Driver IC: SPFD5408 / ILI9325
  • Interface : SPI
  • Number of Pixels: 240 x 320


Additional Information:

  • Item Code: M3-HPLUSEx-AIO
  • Minimum Order Quantity: 1 Set(s)
  • Port of Dispatch: DTDC,DHL,FedEx
  • Production Capacity: 10000
  • Packaging Details: 1. LPC1768 HPLUS Ex Board.

    2. 3.2 inch TFT with Touch.

    3. 128 x 64 Graphical LCD (Model: TM12864H6CCOWA only).

    4. USB Cable.

    5. CD Containing schematic, sample source codes, required software and reference documents.
Yes! I am interested

LPC1788 MiO Board

REQUEST CALLBACK

LPC1788 MiO Board
Approx. Rs 7,500 / Piece(s)
Get Best Quote

We are involved in offering supreme quality range of LPC1788 MiO Board to our clients. This LPC1788 MiO Board is widely accepted in different industrial and commercial sectors as software tool and for application development. To avail the demand of our clients, we are providing this product at market leading prices.

 

Price: Rs. 7,500.00

 

Features of LPC1788 MiO:


  • MCU: LPC1788. Package: BGA-208. Pin Compatible with LPC2478/LPC1788
  • External SDRAM – MT48LC64M4A2 (256 MBits X 2)
  • FLASH – AT25DF641, Interface – SPI (optional)
  • 20 PIN 2.54 mm JTAG Header, 10 pin 1.27mm SWD/JTAG Connectivity options
  • On Board Reset and ISP
  • On Board 12 Mhz Clock
  • On Board 32.768 Khz Clock for RTC
  • MicroSD Card Interface via MCI
  • Option to connect Graphical LCD (TM12864H6CCOWA)
  • On Board Test LED and Buzzer
  • USB Device (USB1)
  • USB Host (USB1 and USB2)
  • On Board POT connected via ADC 0.0
  • On Board CAN Transceiver (MCP2551) – CAN1
  • 2 x UART (RS232) – UART0 and UART2 TTL Outputs for UART0 and UART2
  • On Board PS2 Keyboard Connectivity Option
  • Two switches via GPIO
  • Ethernet Connectivity via DP83848 PHY
  • 40 PIN TFT (24 Bit datalines) Header including SPI and I2C on same header
  • Audio Amplifier. Connected via DAC Out with 3.5mm audio jack.
  • Pin Outs for GPIO including I2c, SPI, ADC etc
  • Internal RTC with CMOS Battery (2032) Connectivity Options.
  • On Board Power Supply for 5V and 3.3V

 

Display Options for LPC1788 MiO:


3.2inch TFT with touch Connectivity


  • Model: KWH032GM02-F05
  • Interface : Parallel (connected to RX62N Board via 40 PIN flat Cable).
  • Number of Pixels: 320 x 240

Note: SPI interface can also be used. Driver IC: ILI9341. (Connection has to be taken through single wires and connected to MiO Board)


3.5inch TFT with touch Connectivity:


  • Model: TM035KBH02
  • Interface : Parallel (connected to RX62N Board via 40 PIN flat Cable).
  • Number of Pixels: 320 x 240

Note: SPI interface can also be used. Driver IC: Novatek NT39016D. (Connection has to be taken through single wires and connected to RX62N Board)

Tested through: Internal TFT Driver

 

4.3 inch TFT with touch Connectivity:


  • Model: TM043NBH02
  • Interface : Parallel (connected to RX62N Board via 40 PIN flat Cable).
  • Number of Pixels: 480 x 272

 

4.3 inch TFT with Touchscreen(SPI):


LPC1788 Features:


  • ARM Cortex M3 Core
  • Upto 120 MHz Operation
  • Nested Vector Interrupt Controller (NVIC) for fast deterministic interrupts.
  • Wakeup Interrupt Controller allows automatic wakeup from any priority interrupts.
  • Memory Protection Unit
  • Four reduced power modes – sleep, deep sleep, power down, deep power down.


PRODUCT ORDERING CODE: 1788-MiO



Additional Information:

  • Item Code: M3-1788-MiO
  • Minimum Order Quantity: 1 Piece(s)
  • Port of Dispatch: DTDC,DHL,FedEx
  • Production Capacity: 1000
  • Packaging Details: 1. LPC1788 MiO

    2. 128x64 GLCD (TM12864H6CCOWA)

    3. USB A to B Cable

    4. 7.5 V/1Amp Adapter

    CD Containing schematic, source codes, software, documentation and related details.
Yes! I am interested

LPC1788 Header Board

REQUEST CALLBACK

LPC1788 Header Board
Approx. Rs 2,500 / Piece(s)
Get Best Quote

Looking toward the ever growing demand of our clients, we are involved in offering a wide range of LPC1788 Header Board. This LPC1788 Header Boardis extensively used at commercial and industrial sectors for various I T working. Our products are tested on different quality parameter before dispatching to the market. Moreover, clients can avail this product in different range and specifications.

 

Price: Rs. 2,500.00


PRODUCT DESCRIPTION:


LPC1788H is a Header Board designed for CORTEX M3 Based Microcontroller from NXP. The Board is a basic IO Pinout Board with options of onboard power and USB Device. Remaining IO pins are taken out on 2.54 mm berg connector. The board has standard JTAG Connectivity for debug/programming.

FEATURES:


  • Controller: CORTEX M3 Based LPC1788 from NXP
  • Package: LQFP208
  • Clock Used: 12MHz for Controller, 32.768KHz for internal RTC
  • Power: On Board, 5V and 3.3V
  • On Board reset and ISP switches
  • JTAG Connectivity Option
  • Test LED via IO Pin
  • On Board USB Device
  • Can be USB or external Powered

Board Specifications:


Dimensions:
  • 106 x 65 mm
  • No of Layers: 2
  • FR4, Blue Solder Mask, ENIG, 1.6mm thickness

JTAG Options for Debug/Programming:


  • Parallel Port JTAG (tested on Keil uvision4.53 IDE, Rowley Crossworks)
  • CoiNel ARM USB JTAG (tested on Rowley CrossWorks)
  • CoiNel CoLinkEx (tested on Keil)
  • The Board can also be used with other compatible JTAG Debuggers.
  • The details on how to use the JTAG and its associated plugins are provided with the documents and also can be downloaded from Download section.


ISP Programming:


  • Programming can be done through the on chip boot loader using UART interface (UART0). You will have to use a TTL to RS232 Converter to do so since the pinout are TTL logic and PC uses RS232 logic. The tool used for programming is Flash Magic.


Programming Using CoFlash:


The controller can be Programmed using CoFlash from CooCox. The binary file needs to loaded using this tool. Check Using CoFlash for more details. You can download the tool in the download section.

To use CoFlash, you would need CoiNel ARM USB JTAG or CoiNel CoLinkEx


USB Boot Loader:


The Board can also be programmed via USB Secondary Bootloader. Check LPC1788 USB Boot Loader for more details.


Tools:


Our products can be used with majority of IDE and plugins that support ARM7 LPC2000 family. A few IDE and plugin details are given below

  • Keil uvision4.53 IDE (32K code limited version can be used. Use 4.53 and above)
  • Rowley Crossworks (30 day evaluation version can be used.)
  • IAR workbench (32K code limited version could be used.)

Plugins/Programmers:


  • H-JTAG, CooCox Colink, Flash Magic have been tested
  • Compatible debuggers like U-Link, J-Link etc can also be used
  • PRODUCT ORDERING CODE: LPC1788H


Additional Information:

  • Item Code: M3-1788H
  • Minimum Order Quantity: 1 Piece(s)
  • Port of Dispatch: DTDC,DHL,FedEx
  • Production Capacity: 10000
  • Packaging Details: 1. LPC1788 Header Board

    2. USB Cable

    3. CD Containing schematic, sample source codes, required software and reference documents.
Yes! I am interested

LPC1768 HPLUS Ex

REQUEST CALLBACK

LPC1768 HPLUS Ex
Approx. Rs 3,150 / Set
Get Best Quote
Product Details:
Minimum Order Quantity1 Set
Dimensions8.6 x 9.1 cm
BrandCoiNel
DesignCustomized

LPC176x HPLUS Ex Board has an onboard Cortex M3 core microcontroller (LPC1768). This board has connectivity options similar to that of HPLUS Board which include Micro SDCard, Ethernet, USB Host/Device, 3.2inch and 3.5inch TFT connectivity option, JTAG etc. Along with these features, the Ex Board has additional features of two RS232 interface plus a connectivity option for 128x64 Graphical LCD.

The display connectivity options are available for the following display units.

Graphical LCD Connectivity:

  • Model: TM12864H6CCOWA
  • Driver IC: NT75451
  • Data Interface Parallel
  • Number of Pixels: 128 x 64

3.2inch TFT Connectivity:

  • Model: KWH032GM02-F05
  • Driver IC: SPFD5408 / ILI9325
  • Interface : SPI.
  • Number of Pixels: 240 x 320

Note: 3.5 inch TFT is currently not available

Kit Deliverables:

  • LPC1768 HPLUS Ex Board
  • USB Cable
  • CD Containing schematic, sample source codes, required software and reference documents

Note: JTAG Programmer/Debugger is not the part of the package and needs to be purchased separately

LPC176x HPLUS Ex Features:

  • USB Device and Host Connectivity Options
  • Ethernet with DP83848 PHY MAC
  • SDCard (Micro) Interface
  • RS232 Interface for UART0 and UART3
  • Analog input via ADC0.5
  • Unused I/O pinouts
  • OnBoard Reset and ISP Switches
  • On Board Power Supply Circuit for +5V and +3.3V (USB or external Power Source input options)
  • On Board 12 MHz Clock
  • 32.768 KHz Clock for RTC
  • Option for a CMOS Battery
  • Onboard 20 pin JTAG connector for debugging/programming applications
  • On board TFT Connector for 3.2inch TFT (with touch and without touch)
  • On Board Graphical LCD Connector
  • LED for Power Supply, USB, Ethernet and Test LED
  • Board Dimensions: 90.4 x 86.1 mm

Board Specifications:
  • Laminate: FR4
  • Board Thickness: 1.6mm
  • Finish: ENIG

Features of LPC1768:

  • Best in class Cortex M3 Hardware
  • 100 MHz ARM Core with 64 KB of SRAM and 512 KB Flash
  • 8-channel general purpose DMA controller, 4 UARTs, 2 CAN channels, 2 SSP controllers, SPI interface, 3 I2C interfaces, 2-input plus 2-output I2S interface, 8-channel 12-bit ADC, 10-bit DAC, motor control PWM, Quadrature Encoder interface, 4 general purpose timers, 6-output general purpose PWM, ultra-low power RTC with separate battery supply, and up to 70 general purpose I/O pins


Additional Information:

  • Item Code: M3-HPLUS-Ex
  • Port of Dispatch: DTDC,DHL,FedEx
  • Production Capacity: 50000
  • Packaging Details: 1. LPC1768 HPLUS Ex Board.

    2. USB Cable.

    3. CD Containing schematic, sample source codes, required software and reference documents.
Yes! I am interested

PH Board LPC1343

REQUEST CALLBACK

PH Board LPC1343
Approx. Rs 600 / Piece
Get Best Quote

Owing to rich industrial experience in this domain, we are involved in offering a wide range of PH Board LPC1343 to our clients. These products are extensively used in is designed by expert professionals by using advance machinery and supreme quality material. Our product is widely appreciated for its easy installation and reliable working.

 

Price: Rs. 600.00


PH (Pluggable Header) Board for LPC1343 is based on Cortex M3 core. This is a low cost connector board compatible with Cortex Flyer Base Board.

Features of LPC1343 PH Board

  • Microcontroller: LPC1343. Package: 48 Pin LQFP
  • On Board 12 MHz Clock
  • On Board SWD Connector
  • PIN Compatible with Cortex Flyer Base Board.
  • Board Specifications.
  • Solder Mask: Red
  • Board Dimensions: 64 x 20 mm
  • Finish: ENIG

The PH Board has a 10 pin 1.27mm standard SWD Box Header for debugger connectivity.

Note: The CoiNel CoLinkEx Cortex JTAG/SWD Debugger has to be brought separately and is not the part of PH Board.

The cortex Flyer along with the PH Boards is a very cost effective option and serves as a perfect platform to try your hands on USB and other peripherals based on Cortex M3 based LPC1343 Controller.

The LPC1343 can also be debugged/programmed with various other debuggers/programmers that support standard SWD connectivity options.


JTAG Options for Debug/Programming:

CoiNel CoLinkEx (tested with Keil, CooCox CoIDE)

The Board can also be used with other SWD standard Debuggers.

The details on how to use the SWD and its associated plugins are provided with the documents and also can be downloaded from Download and Support sections.

ISP Programming:

  • Programming can be done through the on chip boot loader using UART interface (UART0) and USB. You will need a Cortex Flyer Base Board for ISP programming. The board is tested for ISP through UART only.
  • The tool used for programming via UART is Flash Magic

Programming using CoFlash

  • The controller can be Programmed using CoFlash from CooCox. The binary file needs to loaded using this tool. Check using CoFlash for more details.
  • To use CoFlash, you would need CoiNel CoLink Ex Debugger.

TOOLS:

Our products can be used with majority of IDE and plugins that support CORTEX M family. A few IDE and plugin details are given below.

  • Keil uvision 4.23 IDE (32K code limited version can be used.)
  • Rowley Crossworks (30 day evaluation version can be used.) – not tested yet
  • IAR workbench (32K code limited version could be used.) – not tested yet
  • CooCox CoIDE (Unlimited, open source)
  • GCC based open source tool chains

Plugins/Programmers:

  • CooCox CoLink Ex for Keil.
  • Flash Magic have been tested for programming.
  • Compatible SWD debuggers like U-Link Me, J-Link etc can also be used.

Kit Deliverables:

  • Cortex M3 Based LPC1343 PH Board
  • CD Containing schematic, sample source codes, required software and reference documents.

PRODUCT ORDERING CODE: M3-PH-1343



Additional Information:

  • Item Code: M3-PH-1343
  • Minimum Order Quantity: 1 Piece
  • Port of Dispatch: DTDC,DHL,FedEx
  • Production Capacity: 100000
Yes! I am interested

LPC1768 Header Board

REQUEST CALLBACK

LPC1768 Header Board
Approx. Rs 1,350 / Piece(s)
Get Best Quote

In order to keep pace with the ever growing demand of our clients, we are involved in offering supreme quality assortment of LPC1768 Header Board. This LPC1768 Header Board is designed by our expert professionals and enriched with sharp edge technology. Moreover, we are offering this product in bulk.

FEATURES:

  • Controller: CORTEX M3 Based LPC1768 from NXP.
  • Package: LQFP100.
  • Clock Used: 12MHz for Controller, 32.768KHz for internal RTC.
  • Power: On Board, 5V and 3.3V.
  • On Board reset and ISP switches.
  • JTAG Connectivity Option.
  • Test LED via IO Pin.
  • On Board USB Device.
  • Can be USB or external Powered.
  • Board Specifications:Dimensions:
  • Dimensions: 90 x 56 mm.
  • No of Layers: 2
  • FR4, Blue Solder Mask, ENIG, 1.6mm thickness.


Additional Information:

  • Item Code: M3-1768H
  • Minimum Order Quantity: 1 Piece(s)
  • Port of Dispatch: DTDC,DHL,FedEx
  • Production Capacity: 10000
  • Packaging Details: LPC1768 Header Board

    USB Cable

    CD Containing schematic, sample source codes, required software and reference documents.
Yes! I am interested

LPC1778 Header Board

REQUEST CALLBACK

LPC1778 Header Board
Approx. Rs 2,500 / Set
Get Best Quote

LPC1778H is a Header Board designed for CORTEX M3 Based Microcontroller from NXP. The Board is a basic IO Pinout Board with options of onboard power and USB Device. Remaining IO pins are taken out on 2.54 mm berg connector. The board has standard JTAG Connectivity for debug/programming.

FEATURES

  1. Controller: CORTEX M3 Based LPC1778 from NXP.
  2. Package: LQFP208.
  3. Clock Used: 12MHz for Controller, 32.768KHz for internal RTC.
  4. Power: On Board, 5V and 3.3V.
  5. On Board reset and ISP switches.
  6. JTAG Connectivity Option.
  7. Test LED via IO Pin.
  8. On Board USB Device.
  9. Can be USB or external Powered.
  10. Board Specifications:Dimensions:
      • 106 x 65 mm.
      • No of Layers: 2
      • FR4, Blue Solder Mask, ENIG, 1.6mm thickness.

JTAG Options for Debug/Programming:


Parallel Port JTAG (tested on Keil uvision4.53 IDE, Rowley Crossworks)

CoiNel ARM USB JTAG (tested on Rowley CrossWorks)

CoiNel CoLinkEx (tested on Keil)

The Board can also be used with other compatible JTAG Debuggers.

The details on how to use the JTAG and its associated plugins are provided with the documents and also can be downloaded from Download section.

ISP Programming:

Programming can be done through the on chip boot loader using UART interface (UART0). You will have to use a TTL to RS232 Converter to do so since the pinout are TTL logic and PC uses RS232 logic. The tool used for programming is Flash Magic.

Programming Using CoFlash

The controller can be Programmed using CoFlash from CooCox. The binary file needs to loaded using this tool. Check Using CoFlash for more details. You can download the tool in the download section.

To use CoFlash, you would need CoiNel ARM USB JTAG or CoiNel CoLinkEx.

USB Boot Loader

The Board can also be programmed via USB Secondary Bootloader. Check LPC1788 USB Boot Loader for more details.

TOOLS:

Our products can be used with majority of IDE and plugins that support ARM7 LPC2000 family. A few IDE and plugin details are given below.

  • Keil uvision4.53 IDE (32K code limited version can be used. Use 4.53 and above)
  • Rowley Crossworks (30 day evaluation version can be used.)
  • IAR workbench (32K code limited version could be used.)

Plugins/Programmers:

H-JTAG, CooCox Colink, Flash Magic have been tested.

Compatible debuggers like U-Link, J-Link etc can also be used.



Additional Information:

  • Item Code: M3-LPC1778H
  • Minimum Order Quantity: 1 Set
  • Port of Dispatch: DTDC,DHL,FedEx
  • Production Capacity: 1000
  • Packaging Details: 1. LPC1778 Header Board

    2. USB Cable

    3. CD Containing schematic, sample source codes, required software and reference documents.
Yes! I am interested

 
X


Call Us:  +91-8079448265
CoiNel Technology Solutions LLP
Prakash Rajolli (Co- Founder & Director)
No. 32, Old No. 1355, 2nd Floor, HAPBCO Tower, 9th Main, 4th B Cross, Hampinagar, Vijaynagar ,
Bengaluru - 560104, Karnataka, India
Contact via E-mail
Contact via SMS



Home  |   About Us   |  Products & Services  |  Site Map  |   Contact Us   |   Mobile Site

© CoiNel Technology Solutions LLP. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited

CoiNel Technology Solutions LLP