Microcontroller Board

Approx. Rs 600 / PieceGet Latest Price

Enriched with sharp edge technology in this domain we are involved in offering a wide range of PH Board LPC11U2x to our clients. Our product is widely appreciated for its easy installation, optimum performance and quality working. Furthermore, we are offering this product at market leading price.

• Microcontroller: LPC11U24. Package: 48 Pin LQFP
• On Board 12 MHz Clock
• On Board SWD Connector
• PIN Compatible with Cortex Flyer Base Board

• Solder Mask: Red
• Board Dimensions: 64 x 20 mm
• Finish: ENIG

• The PH Board has a 10 pin 1.27mm standard SWD Box Header for debugger connectivity
• Note: The CoiNel CoLinkEx Cortex JTAG/SWD Debugger has to be brought separately and is not the part of PH Board
• The cortex Flyer along with the PH Boards is a very cost effective option and serves as a perfect platform to try your hands on USB and other peripherals based on Cortex M0 based LPC11U24 Controller
• The LPC11U24 can also be debugged/programmed with various other debuggers/programmers that support standard SWD connectivity options

• CoiNel CoLinkEx (tested with Keil, CooCox CoIDE)
• The Board can also be used with other SWD standard Debuggers
• The details on how to use the SWD and its associated plugins are provided with the documents and also can be downloaded from Download and Support sections

• Programming can be done through the on chip boot loader using UART interface (UART0) and USB. You will need a Cortex Flyer Base Board for ISP programming. The board is tested for ISP through UART only
• The tool used for programming via UART is Flash Magic
• Programming using CoFlash
• The controller can be Programmed using CoFlash from CooCox. The binary file needs to loaded using this tool. Check using CoFlash for more details
• To use CoFlash, you would need CoiNel CoLink Ex Debugger

• Keil uvision 4.23 IDE (32K code limited version can be used.)
• Rowley Crossworks (30 day evaluation version can be used.) – not tested yet
• IAR workbench (32K code limited version could be used.) – not tested yet
• CooCox CoIDE (Unlimited, open source)
• GCC based open source tool chains

• CooCox CoLink Ex for Keil
• Flash Magic have been tested for programming
• Compatible SWD debuggers like U-Link Me, J-Link etc can also be used

• Cortex M0 Based LPC11U24 PH Board
• CD Containing schematic, sample source codes, required software and reference documents

Additional Information:

• Item Code: M0-PH-11U24

Approx. Rs 3,150 / SetGet Latest Price

• Model: TM12864H6CCOWA
• Driver IC: NT75451
• Data Interface Parallel
• Number of Pixels: 128 x 64

• Model: KWH032GM02-F05
• Driver IC: SPFD5408 / ILI9325
• Interface : SPI.
• Number of Pixels: 240 x 320

• LPC1768 HPLUS Ex Board
• USB Cable
• CD Containing schematic, sample source codes, required software and reference documents

• USB Device and Host Connectivity Options
• Ethernet with DP83848 PHY MAC
• SDCard (Micro) Interface
• RS232 Interface for UART0 and UART3
• Analog input via ADC0.5
• Unused I/O pinouts
• OnBoard Reset and ISP Switches
• On Board Power Supply Circuit for +5V and +3.3V (USB or external Power Source input options)
• On Board 12 MHz Clock
• 32.768 KHz Clock for RTC
• Option for a CMOS Battery
• Onboard 20 pin JTAG connector for debugging/programming applications
• On board TFT Connector for 3.2inch TFT (with touch and without touch)
• On Board Graphical LCD Connector
• LED for Power Supply, USB, Ethernet and Test LED
• Board Dimensions: 90.4 x 86.1 mm

• Laminate: FR4
• Board Thickness: 1.6mm
• Finish: ENIG

• Best in class Cortex M3 Hardware
• 100 MHz ARM Core with 64 KB of SRAM and 512 KB Flash
• 8-channel general purpose DMA controller, 4 UARTs, 2 CAN channels, 2 SSP controllers, SPI interface, 3 I2C interfaces, 2-input plus 2-output I2S interface, 8-channel 12-bit ADC, 10-bit DAC, motor control PWM, Quadrature Encoder interface, 4 general purpose timers, 6-output general purpose PWM, ultra-low power RTC with separate battery supply, and up to 70 general purpose I/O pins

Additional Information:

• Item Code: M3-HPLUS-Ex
• Port of Dispatch: DTDC,DHL,FedEx
• Production Capacity: 50000
• Packaging Details: 1. LPC1768 HPLUS Ex Board. 2. USB Cable. 3. CD Containing schematic, sample source codes, required software and reference documents.

Approx. Rs 5,200 / PieceGet Latest Price

LPC2148 ARTIST is a low cost learners/development kit based on LPC214x ARM7 series of micro controller from NXP. The board is designed for general purpose applications and includes a variety of hardware to demonstrate various peripherals for the controller. The board is ideally suitable for training, hobbyist and for developmental purposes.

The sample codes are provided to demonstrate every feature that is supported on the Board.

The features of the board are as follows:

• Microcontroller: ARM7 TDMI Based LPC2148 from NXP
• 12Mhz Oscillator for controller
• On Board Reset and ISP Switches
• Manual/Auto programming option via UART0
• JTAG Debugging
• Inbuilt RTC with 32.768KHz Crystal Oscillator
• External RTC (DS1307) with 32.768KHz Crystal Oscillator
• CMOS Backup for RTC
• PS2 Interface
• USB Device
• RS232: UART0 and UART1
• Audio OUT via DAC
• On Board EEPROM (24LC256)
• On Board Temperature Sensor
• I2C Based 7 Segment Driver
• POT for ADC
• Connectivity for Buzzer and Relay
• 8 Parallel Slide Switches connected to IO Pins
• 8 LEDs connected via IO Pins
• SD Card Interface
• Stepper Motor Interface Option
• 128 x 64 Graphical LCD (TM12864H6CCOWA) on board with driver NT75451
• 16x2 alphanumeric LCD (4bit mode) with driver HD44780 with contrast control
• Onboard 4x4 Matrix Keypad
• Onboard Power Supply (5V and 3.3V)

• 220 x 154 mm

• Laminate: FR4
• Board Thickness: 1.6mm
• Finish: Immersion Silver

Kit Deliverables:

• ARM7 FULL FEATURE ARTIST Board
• A to B USB Cable
• 9V/1A Adapter
• CD containing sample code, datasheets, user guides and manual, schematic, video tutorail details etc

PRODUCT ORDERING CODE: A7-2148ART

Additional Information:

• Item Code: A7-2148ART
• Port of Dispatch: DTDC,DHL,FedEx
• Production Capacity: 10000
• Packaging Details: 1.ARM7 FULL FEATURE ARTIST Board 2.A to B USB Cable 3.9V/1A Adapter 4.CD containing sample code, datasheets, user guides and manual, schematic, video tutorail details etc

Approx. Rs 2,800 / Piece(s)Get Latest Price

We are counted as prominent name in this domain, engaged in offering a wide assortment of LPC2148 DEV Board to our clients. This LPC2148 DEV Board is extensively used in computers, printers and other allied equipments for quality working. To avail the demand of our clients, we are offering this product at market leading prices.

OVERVIEW:

LPC2148 DEV Board is an extension board for LPC2148 Header Board with ARM7 core microcontroller (LPC2148). The DEV Board is a cost effective solution for learning and designing applications based on ARM7 core. The DEV Board has numerous peripheral connectivity options thereby making it easy for the user to kickstart with firmware development using this board. All the source codes that demonstrate working of each of the onboard modules/peripherals are provided along with the board.

The graphical display connectivity option is available for the following display units.

Graphical LCD Connectivity Options:

• Model: TM12864H6CCOWA
• Driver IC: NT75451
• Data Interface Parallel
• Number of Pixels: 128 x 64
• Display Module Size: 74 x 39 mm
• Model: TM12864A8CCWGWA
• Driver IC: ST7565R
• Data Interface Parallel
• Number of Pixels: 128 x 64
• Display Module Size:52.40 x 77.40 mm
• This Graphical Display is not the part of the package. You can also purchase the graphical LCD separately from the following link

Features of LPC2148 Dev Board:

• Processor: NXPs ARM7 TDMI LPC2148
• 12MHz for CPU
• 32.768 KHz for RTC

LPC2148 MCU Specifications:

• High Performance 32-bit ARM7TDMI-S™ CPU with 512 Kb Flash
• 32 KB Data Memory (SRAM)
• In-System Programming/In-Application Programming (ISP/IAP) via on-chip boot loader software
• Single Flash sector or full chip erase in 400 ms and programming of 256 bytes in 1 ms
• Embedded ICE RT and Embedded Trace interfaces offer real-time debugging with the on- chip Real Monitor software and high-speed tracing of instruction execution
• USB 2.0 Full-speed compliant device controller with 2 KB of endpoint RAM
• Provides 8KB of on-chip RAM accessible to USB by DMA
• Two 10-bit ADCs provide a total of 14 analog inputs, with conversion times as low as 2.44 us per channel
• Single 10-bit DAC provides variable analog output
• Two 32-bit Timers/External event counters
• Four Capture and four Compare channels
• PWM unit with six output pins
• Low power Real-time clock with independent power and dedicated 32 kHz clock input
• Multiple serial interfaces including two UARTs, two Fast I2C (400 kbit/s), SPI™ and SSP with buffering and variable data length capabilities
• Up to 45 of 5 V tolerant general purpose I/O pins
• Up to nine edge or level sensitive external interrupt pins
• On-chip integrated oscillator operates with external crystal in range of 1 MHz to 25 MHz.
• Power saving modes include Idle and Power-down
• Individual enable/disable of peripheral functions
• Processor wake-up from Power-down mode via external interrupt
• Single power supply chip with Power-On Reset (POR) and Brown-Out Detection (BOD)
• CPU Operating Voltage range of 3.0 V to 3.6 V

PRODUCT ORDERING CODE: A7-2148DEV

Additional Information:

• Item Code: A7-2148DEV
• Port of Dispatch: DTDC,DHL,FedEx
• Production Capacity: 100000

Approx. Rs 2,500 / PieceGet Latest Price

To attain the maximum satisfaction of our clients, we are involved in offering a wide assortment of LPC2478 Header Electronic Boards. This product is made with fine quality of material and highly appreciated for its easy installation, optimum performance and long service life. Furthermore, we are offering this product in different range and specifications.

PRODUCT DESCRIPTION:

LPC2478H is a Header Board designed for ARM7-TDMI Based LPC2478 from NXP. The Board is a basic IO Pinout Board with options of onboard power and USB Device. Remaining IO pins are taken out on 2.54 mm berg connector. The board has standard JTAG Connectivity for debug/programming.

Specifications:-

• Dimensions: 106 x 65 mm
• No of Layers: 2
• FR4, RED Solder Mask, ENIG, 1.6mm thickness

FEATURES:

• Controller: ARM7 Based LPC2478 from NXP
• Package: LQFP208
• Clock Used: 12MHz for Controller, 32.768KHz for internal RTC
• Power: On Board, 5V and 3.3V
• On Board reset and ISP switches
• JTAG Connectivity Option
• Test LED via IO Pin
• On Board USB Device
• Can be USB or external Powered
• Board Specifications
• Dimensions: 106 x 65 mm
• No of Layers: 2
• FR4, RED Solder Mask, ENIG, 1.6mm thickness

Kit Deliverables:

• LPC2478 Header Board
• USB Cable

JTAG Options for Debug/Programming:

• Parallel Port JTAG (tested on Keil, Rowley CrossWorks)
• CoiNel ARM USB JTAG (tested on Rowley CrossWorks)
• The Board can also be used with other JTAG Debuggers (Check compatibility to ensure).
• The details on how to use the JTAG and its associated plugins are provided with the documents and also can be downloaded from Download and Support sections.

ISP Programming:

• Programming can be done through the on chip boot loader using UART interface (UART0). You will have to use a TTL to RS232 Converter to do so since the pinout are TTL logic and PC uses RS232 logic. The tool used for programming is Flash Magic

USB Boot Loader:

• The Board can also be programmed via USB Secondary Bootloader. The bootloader code has not been tested on this chip

Tools:

Our products can be used with majority of IDE and plugins that support ARM7 LPC24xx family. A few IDE and plugin details are given below.

• Keil uvision4 IDE (32K code limited version can be used.)
• Rowley Crossworks(30 day evaluation version can be used.)
• IAR workbench (32K code limited version could be used.)
• GCC based open source tool chains

Plugins/Programmers:

• H-JTAG, Flash Magic have been tested.
• Compatible debuggers like U-Link, J-Link etc can also be used

PRODUCT ORDERING CODE: A7-LPC2478H

Additional Information:

• Item Code: A7-2478H
• Port of Dispatch: DTDC,DHL,FedEx
• Production Capacity: 1000
• Packaging Details: LPC2478 Header Board USB Cable

Approx. Rs 700 / PieceGet Latest Price

Being a reckoned name in this domain, we are involved in offering a wide assortment of PH Board LPC11Cxx to our clients. This PH Board LPC11Cxx is made with fine quality of material, which we have bought from our reliable vendors. As per the demand of our clients, we are offering this product at pocket friendly prices.

• CoiNel CoLinkEx (tested with Keil, CooCox CoIDE)
• The Board can also be used with other SWD standard Debuggers
• The details on how to use the SWD and its associated plugins are provided with the documents and also can be downloaded from Download and Support sections

• Programming can be done through the on chip boot loader using UART interface (UART0) and CAN. You will need a Cortex Flyer Base Board for ISP programming. The board is tested for ISP through UART only
• The tool used for programming via UART is Flash Magic
• Programming using CoFlash
• The controller can be Programmed using CoFlash from CooCox. The binary file needs to loaded using this tool. Check using CoFlash for more details
• To use CoFlash, you would need CoiNel CoLink Ex Debugger

• Keil uvision 4.23 IDE (32K code limited version can be used.)
• Rowley Crossworks (30 day evaluation version can be used.) – not tested yet
• IAR workbench (32K code limited version could be used.) – not tested yet
• CooCox CoIDE (Unlimited, open source)
• GCC based open source tool chains

• CooCox CoLink Ex for Keil
• Flash Magic have been tested for programming.
• Compatible SWD debuggers like U-Link Me, J-Link etc can also be used

• Cortex M0 Based LPC11C1x PH Board
• CD Containing schematic, sample source codes, required software and reference documents.

Additional Information:

• Item Code: M0-PH-11C1x

Approx. Rs 6,500 / Set(s)Get Latest Price

• Model: TM12864H6CCOWA
• Driver IC: NT75451
• Data Interface Parallel
• Number of Pixels: 128 x 64

• Model: KWH032GM02-F05
• Driver IC: SPFD5408 / ILI9325
• Interface : SPI
• Number of Pixels: 240 x 320

Additional Information:

• Item Code: M3-HPLUSEx-AIO
• Port of Dispatch: DTDC,DHL,FedEx
• Production Capacity: 10000
• Packaging Details: 1. LPC1768 HPLUS Ex Board. 2. 3.2 inch TFT with Touch. 3. 128 x 64 Graphical LCD (Model: TM12864H6CCOWA only). 4. USB Cable. 5. CD Containing schematic, sample source codes, required software and reference documents.

Approx. Rs 2,500 / SetGet Latest Price

LPC1778H is a Header Board designed for CORTEX M3 Based Microcontroller from NXP. The Board is a basic IO Pinout Board with options of onboard power and USB Device. Remaining IO pins are taken out on 2.54 mm berg connector. The board has standard JTAG Connectivity for debug/programming.

• Parallel Port JTAG (tested on Keil uvision4.53 IDE, Rowley Crossworks)
• CoiNel ARM USB JTAG (tested on Rowley CrossWorks)
• CoiNel CoLinkEx (tested on Keil)

The Board can also be used with other compatible JTAG Debuggers.

The details on how to use the JTAG and its associated plugins are provided with the documents and also can be downloaded from the Download section.

ISP Programming:

• Programming can be done through the on-chip bootloader using UART interface (UART0). You will have to use a TTL to RS232 Converter to do so since the pinout is TTL logic and PC uses RS232 logic. The tool used for programming is Flash Magic.

Programming Using CoFlash:

• The controller can be Programmed using CoFlash from CooCox. The binary file needs to load using this tool. Check Using CoFlash for more details. You can download the tool in the download section.
• To use CoFlash, you would need CoiNel ARM USB JTAG or CoiNel CoLinkEx.

USB Boot Loader:

• The Board can also be programmed via USB Secondary Bootloader. Check LPC1788 USB Boot Loader for more details.

Tools:

Our products can be used with the majority of IDE and plugins that support ARM7 LPC2000 family. A few IDE and plugin details are given below.

• Keil uvision4.53 IDE (32K code limited version can be used. Use 4.53 and above)
  
• Rowley Crossworks (30-day evaluation version can be used.)
  
• IAR workbench (32K code limited version could be used.)

Additional Information:

• Item Code: M3-LPC1778H

Approx. Rs 1,200 / Piece(s)Get Latest Price

We are banked with expert team and professionals, involved in offering supreme quality range of LPC2148 Header Board to our clients. This product is known for its sturdy construction, excellent design and high durability. Our products are tested on different quality parameter before dispatching to the market.

PRODUCT DESCRIPTION:

LPC2148H is a Header Board designed for ARM7-TDMI Based LPC2148 controller from NXP. The Board is a basic IO Pinout Board with options of onboard power and USB Device. Remaining IO pins are taken out on 2.54 mm berg connector. The board has standard JTAG Connectivity for debug/programming.

Features:

• Controller: ARM7 Based LPC2148 from NXP
• Package: LQFP64
• Clock Used: 12MHz for Controller, 32.768KHz for internal RTC
• Power: On Board, 5V and 3.3V
• On Board reset and ISP switches
• JTAG Connectivity Option
• Test LED via IO Pin
• On Board USB Device
• Can be USB or external Powered

• Dimensions: 89 x 51 mm
• No of Layers: 2
• FR4, Blue Solder Mask, ENIG, 1.6mm thickness

Kit Deliverables:

• LPC2148 Header Board
• USB Cable

JTAG Options for Debug/Programming:

• Parallel Port JTAG (tested on Keil, Rowley CrossWorks)
• CoiNel ARM USB JTAG (tested on Rowley CrossWorks)
• The Board can also be used with other JTAG Debuggers (Check compatibility to ensure).
• The details on how to use the JTAG and its associated plugins are provided with the documents and also can be downloaded from Download and Support sections.

ISP Programming:

• Programming can be done through the on chip boot loader using UART interface (UART0). You will have to use a TTL to RS232 Converter to do so since the pinout are TTL logic and PC uses RS232 logic. The tool used for programming is Flash Magic

USB Boot Loader:

• The Board can also be programmed via USB Secondary Bootloader. Check LPC2148 USB Boot Loader for more details

Tools:

Our products can be used with majority of IDE and plugins that support ARM7 LPC21xx family. A few IDE and plugin details are given below.

• Keil uvision4 IDE (32K code limited version can be used.)
• Rowley Crossworks(30 day evaluation version can be used.)
• IAR workbench (32K code limited version could be used.)
• GCC based open source tool chains

Plugins/Programmers:

• H-JTAG, Flash Magic have been tested
• Compatible debuggers like U-Link, J-Link etc can also be used

PRODUCT ORDERING CODE: A7-LPC2148H

Additional Information:

• Item Code: A7-LPC2168H
• Port of Dispatch: DTDC,DHL,FedEx
• Production Capacity: 100000
• Packaging Details: LPC2148 Header Board USB Cable CD

Approx. Rs 1,450 / Piece(s)Get Latest Price

• Controller: CORTEX M3 Based LPC1768 from NXP.
• Package: LQFP100.
• Clock Used: 12MHz for Controller, 32.768KHz for internal RTC.
• Power: On Board, 5V and 3.3V.
• On Board reset and ISP switches.
• JTAG Connectivity Option.
• Test LED via IO Pin.
• On Board USB Device.
• Can be USB or external Powered.
• Board Specifications:Dimensions:
• Dimensions: 90 x 56 mm.
• No of Layers: 2
• FR4, Blue Solder Mask, ENIG, 1.6mm thickness.

Additional Information:

• Item Code: M3-1768H
• Port of Dispatch: DTDC,DHL,FedEx
• Production Capacity: 10000
• Packaging Details: LPC1768 Header Board USB Cable CD Containing schematic, sample source codes, required software and reference documents.

Approx. Rs 7,500 / Piece(s)Get Latest Price

Looking toward the ever growing demand of our clients, we are offering a wide range of LPC4088 MiO Board. Our product is extensively used in commercial and industrial sectors as software tool to start with application development. As per the demand of our clients, we are providing this product in different range and specifications.

• The LPC4088 MiO is based on Cortex M4 Core, running at up to 120MHz.The MiO lets you quickly start with your development on LPC4088 based designs
• The sample code is provided for every peripheral that’s on board. Along with it, the schematic, required software and tools are provided using which you can start with your application development from day one
• LPC4088 is suitable for various advanced applications that require high end display connectivity options
• The LPC4088 MiO has a 20 pin Wiggler-compatible JTAG interface and a SWD interface which can be used for debugging/programming
• The board can be debugged/programmed using parallel JTAG, CoiNel USB JTAG and other compatible debuggers like ULink2, ULink Me, ULink Pro, JLink ARM, Red Probe etc
• Note: Display Options for LPC4088 MiO are sold separately and are not the part of MiO Package

Features of LPC4088 MiO:

• MCU: LPC4088. Package: BGA-208. Pin Compatible with LPC2478/LPC1788
• External SDRAM – MT48LC64M4A2 (256 MBits X 2)
• FLASH – AT25DF641, Interface – SPI (optional)
• 20 PIN 2.54 mm JTAG Header, 10 pin 1.27mm SWD/JTAG Connectivity options.
• On Board Reset and ISP
• On Board 12 Mhz Clock
• On Board 32.768 Khz Clock for RTC
• MicroSD Card Interface via MCI
• Option to connect Graphical LCD (TM12864H6CCOWA)
• On Board Test LED and Buzzer
• USB Device (USB1)
• USB Host (USB1 and USB2)
• On Board POT connected via ADC 0.0
• On Board CAN Transceiver (MCP2551) – CAN1
• 2 x UART (RS232) – UART0 and UART2 TTL Outputs for UART0 and UART2
• On Board PS2 Keyboard Connectivity Option
• Two switches via GPIO
• Ethernet Connectivity via DP83848 PHY
• 40 PIN TFT (24 Bit datalines) Header including SPI and I2C on same header
• Audio Amplifier. Connected via DAC Out with 3.5mm audio jack.
• Pin Outs for GPIO including I2c, SPI, ADC etc
• Internal RTC with CMOS Battery (2032) Connectivity Options.
• On Board Power Supply for 5V and 3.3V

Display Options for LPC4088 MiO

3.2inch TFT with touch Connectivity:

• Model: KWH032GM02-F05
• Interface : Parallel (connected to RX62N Board via 40 PIN flat Cable).
• Number of Pixels: 320 x 240
• Note: SPI interface can also be used. Driver IC: ILI9341. (Connection has to be taken through single wires and connected to MiO Board)

3.5inch TFT with touch Connectivity:

• Model: TM035KBH02
• Interface : Parallel (connected to RX62N Board via 40 PIN flat Cable).
• Number of Pixels: 320 x 240
• Note: SPI interface can also be used. Driver IC: Novatek NT39016D. (Connection has to be taken through single wires and connected to RX62N Board)
• Tested through: Internal TFT Driver

4.3 inch TFT with touch Connectivity:

• Model: TM043NBH02
• Interface : Parallel (connected to RX62N Board via 40 PIN flat Cable).
• Number of Pixels: 480 x 272

4.3 inch TFT with Touchscreen(SPI):

• Note: The above board supports interface of touchscreen with SPI only

Additional Information:

• Item Code: M4-4088-MiO
• Port of Dispatch: DTDC,DHL,FedEx
• Production Capacity: 1000

Approx. Rs 600 / PieceGet Latest Price

Owing to rich industrial experience in this domain, we are involved in offering a wide range of PH Board LPC1343 to our clients. These products are extensively used in is designed by expert professionals by using advance machinery and supreme quality material. Our product is widely appreciated for its easy installation and reliable working.

Price: Rs. 600.00

PH (Pluggable Header) Board for LPC1343 is based on Cortex M3 core. This is a low cost connector board compatible with Cortex
Flyer Base Board.

Features of LPC1343 PH Board

• Microcontroller: LPC1343. Package: 48 Pin LQFP
• On Board 12 MHz Clock
• On Board SWD Connector
• PIN Compatible with Cortex Flyer Base Board.
• Board Specifications.
• Solder Mask: Red
• Board Dimensions: 64 x 20 mm
• Finish: ENIG

The PH Board has a 10 pin 1.27mm standard SWD Box Header for debugger connectivity.

The cortex Flyer along with the PH Boards is a very cost effective option and serves as a perfect platform to try your hands on USB and other peripherals based on Cortex M3 based LPC1343 Controller.

JTAG Options for Debug/Programming:

CoiNel CoLinkEx (tested with Keil, CooCox CoIDE)

The Board can also be used with other SWD standard Debuggers.

The details on how to use the SWD and its associated plugins are provided with the documents and also can be downloaded from Download and Support sections.

ISP Programming:

• Programming can be done through the on chip boot loader using UART interface (UART0) and USB. You will need a Cortex Flyer Base Board for ISP programming. The board is tested for ISP through UART only.
• The tool used for programming via UART is Flash Magic

Programming using CoFlash

• The controller can be Programmed using CoFlash from CooCox. The binary file needs to loaded using this tool. Check using CoFlash for more details.
• To use CoFlash, you would need CoiNel CoLink Ex Debugger.

TOOLS:

Our products can be used with majority of IDE and plugins that support CORTEX M family. A few IDE and plugin details are given below.

• Keil uvision 4.23 IDE (32K code limited version can be used.)
• Rowley Crossworks (30 day evaluation version can be used.) – not tested yet
• IAR workbench (32K code limited version could be used.) – not tested yet
• CooCox CoIDE (Unlimited, open source)
• GCC based open source tool chains

Plugins/Programmers:

• CooCox CoLink Ex for Keil.
• Flash Magic have been tested for programming.
• Compatible SWD debuggers like U-Link Me, J-Link etc can also be used.

Kit Deliverables:

• Cortex M3 Based LPC1343 PH Board
• CD Containing schematic, sample source codes, required software and reference documents.

PRODUCT ORDERING CODE: M3-PH-1343

Additional Information:

• Item Code: M3-PH-1343
• Port of Dispatch: DTDC,DHL,FedEx
• Production Capacity: 100000

Approx. Rs 550 / PieceGet Latest Price

Being a reckoned name in this domain, we are involved in offering a wide assortment of PH Board LPC1114 to our clients. This PH Board LPC1114 is widely appreciated for its optimum performance and long service life. To attain the maximum satisfaction of our clients, we are offering this product at market leading prices.

Features :

• Microcontroller: LPC1114. Package: 48 Pin LQFP
• On Board 12 MHz Clock
• On Board SWD Connector
• PIN Compatible with Cortex Flyer Base Board.
• Board Specifications.
• Solder Mask: Red
• Board Dimensions: 64 x 20 mm
• Finish: ENIG
• The PH Board has a 10 pin 1.27mm standard SWD Box Header for debugger connectivity
• Note: The CoiNel CoLinkEx Cortex JTAG/SWD Debugger has to be brought separately and is not the part of PH Board
• The cortex Flyer along with the PH Boards is a very cost effective option and serves as a perfect platform to try your hands on peripherals based on Cortex M0 based LPC1114 Controller
• The LPC1114 can also be debugged/programmed with various other debuggers/programmers that support standard SWD connectivity options

JTAG Options for Debug/Programming:

• CoiNel CoLinkEx (tested with Keil, CooCox CoIDE)
• The Board can also be used with other SWD standard Debuggers
• The details on how to use the SWD and its associated plugins are provided with the documents and also can be downloaded from Download and Support sections

ISP Programming:

• Programming can be done through the on chip boot loader using UART interface (UART0). You will need a Cortex Flyer Base Board for ISP programming. The board is tested for ISP through UART only
• The tool used for programming via UART is Flash Magic

Programming using CoFlash:

• The controller can be Programmed using CoFlash from CooCox. The binary file needs to loaded using this tool. Check using CoFlash for more details
• To use CoFlash, you would need CoiNel CoLink Ex Debugger

Tools:

Our products can be used with majority of IDE and plugins that support CORTEX M family. A few IDE and plugin details are given below:

• Keil uvision 4.23 IDE (32K code limited version can be used.)
• Rowley Crossworks (30 day evaluation version can be used.) – not tested yet
• IAR workbench (32K code limited version could be used.) – not tested yet
• CooCox CoIDE (Unlimited, open source)
• GCC based open source tool chains

Plugins/Programmers:

• CooCox CoLink Ex for Keil
• Flash Magic have been tested for programming.
• Compatible SWD debuggers like U-Link Me, J-Link etc can also be used

Kit Deliverables:

• Cortex M0 Based LPC1114 PH Board
• CD Containing schematic, sample source codes, required software and reference documents

PRODUCT ORDERING CODE: M3-PH-1114

Additional Information:

• Item Code: M0-PH-1114
• Pay Mode Terms: L/C (Letter of Credit),D/A,D/P,T/T (Bank Transfer),Other
• Port of Dispatch: DTDC,DHL,FedEx
• Production Capacity: 10000

Approx. Rs 2,500 / Piece(s)Get Latest Price

Looking toward the ever growing demand of our clients, we are involved in offering a wide range of LPC1788 Header Board. This LPC1788 Header Board is extensively used at commercial and industrial sectors for various I T working. Our products are tested on different quality parameter before dispatching to the market. Moreover, clients can avail this product in different range and specifications.

Price: Rs. 2,500.00

PRODUCT DESCRIPTION:

LPC1788H is a Header Board designed for CORTEX M3 Based Microcontroller from NXP. The Board is a basic IO Pinout Board with options of onboard power and USB Device. Remaining IO pins are taken out on 2.54 mm berg connector. The board has standard JTAG Connectivity for debug/programming.

FEATURES:

• Controller: CORTEX M3 Based LPC1788 from NXP
• Package: LQFP208
• Clock Used: 12MHz for Controller, 32.768KHz for internal RTC
• Power: On Board, 5V and 3.3V
• On Board reset and ISP switches
• JTAG Connectivity Option
• Test LED via IO Pin
• On Board USB Device
• Can be USB or external Powered

• 106 x 65 mm
• No of Layers: 2
• FR4, Blue Solder Mask, ENIG, 1.6mm thickness

• Parallel Port JTAG (tested on Keil uvision4.53 IDE, Rowley Crossworks)
• CoiNel ARM USB JTAG (tested on Rowley CrossWorks)
• CoiNel CoLinkEx (tested on Keil)
• The Board can also be used with other compatible JTAG Debuggers.
• The details on how to use the JTAG and its associated plugins are provided with the documents and also can be downloaded from Download section.

ISP Programming:

• Programming can be done through the on chip boot loader using UART interface (UART0). You will have to use a TTL to RS232 Converter to do so since the pinout are TTL logic and PC uses RS232 logic. The tool used for programming is Flash Magic.

Programming Using CoFlash:

The controller can be Programmed using CoFlash from CooCox. The binary file needs to loaded using this tool. Check Using CoFlash for more details. You can download the tool in the download section.

To use CoFlash, you would need CoiNel ARM USB JTAG or CoiNel CoLinkEx

USB Boot Loader:

The Board can also be programmed via USB Secondary Bootloader. Check LPC1788 USB Boot Loader for more details.

Tools:

Our products can be used with majority of IDE and plugins that support ARM7 LPC2000 family. A few IDE and plugin details are given below
 

• Keil uvision4.53 IDE (32K code limited version can be used. Use 4.53 and above)
  
• Rowley Crossworks (30 day evaluation version can be used.)
  
• IAR workbench (32K code limited version could be used.)

Plugins/Programmers:

• H-JTAG, CooCox Colink, Flash Magic have been tested
• Compatible debuggers like U-Link, J-Link etc can also be used
• PRODUCT ORDERING CODE: LPC1788H

Additional Information:

• Item Code: M3-1788H
• Port of Dispatch: DTDC,DHL,FedEx
• Production Capacity: 10000
• Packaging Details: 1. LPC1788 Header Board 2. USB Cable 3. CD Containing schematic, sample source codes, required software and reference documents.

Approx. Rs 2,500 / PieceGet Latest Price

LPC176x Mini Board has an on board Cortex M3 core micro controller (LPC1768). This board has the connectivity options for Ethernet, USB Host, Serial, CAN, JTAG etc. IO pinout are also provided.

Kit Deliverable:

Note: JTAG Programmer/Debugger is not the part of the package and needs to be purchased separately.

LPC176x HPLUS Ex Features

1. USB Device Connectivity.
2. Ethernet with DP83848 PHY MAC.
3. 2 x CAN
4. RS232 Interface for UART0 and UART3
5. Unused I/O pin outs.
6. On Board Reset and ISP Switches.
7. On Board Power Supply Circuit for +5V and +3.3V (USB or external Power Source input options)
8. On Board 12 MHz Clock
9. Option for a CMOS Battery.
10. On board 20 pin JTAG connector for debugging/programming applications.
11. LED for Power Supply, USB, Ethernet and Test LED.
12. Board Dimensions: mm
13. Board Specifications:
    1. Laminate: FR4
       1. • Board Thickness: 1.6mm
          • Finish: ENIG

Features of LPC1768

Best in class Cortex M3 Hardware.

1. 100 MHz ARM Core with 64 KB of SRAM and 512 KB Flash.
2. 8-channel general purpose DMA controller, 4 UARTs, 2 CAN channels, 2 SSP controllers, SPI interface, 3 I2C interfaces, 2-input plus 2-output I2S interface, 8-channel 12-bit ADC, 10-bit DAC, motor control PWM, Quadrature Encoder interface, 4 general purpose timers, 6-output general purpose PWM, ultra-low power RTC with separate battery supply, and up to 70 general purpose I/O pins.

JTAG Options for Debug/Programming:

Parallel Port JTAG (tested on Keil, Rowley Cross Works)

CoiNel ARM USB JTAG (tested on Keil, CooCox CoIDE, Rowley Cross Works)

CoiNel Co LinkEx (tested with Keil, CooCox CoIDE)

The Board can also be used with other JTAG Debuggers.

The details on how to use the JTAG and its associated plugins are provided with the documents and also can be downloaded from Download and Support sections.

ISP Programming:

Programming can be done through the on chip boot loader using UART interface (UART0). You will have to use a TTL to RS232 Converter to do so since the pinout are TTL logic and PC uses RS232 logic. The tool used for programming is Flash Magic

Programming using CoFlash

The controller can be Programmed using Co Flash from CooCox. The binary file needs to loaded using this tool. Check using CoFlash for more details.

To use CoFlash, you would need CoiNel ARM USB JTAG or CoiNel CoLinkEx Debuggers.

USB Boot Loader:

The Board can also be programmed via USB Secondary Bootloader. Check LPC1768 USB Boot Loader for more details.

TOOLS:

Our products can be used with majority of IDE and plugins that support CORTEX M3 LPC17xx family. A few IDE and plugin details are given below.

• Keil uvision4 IDE (32K code limited version can be used.)
• Rowley Cross works(30 day evaluation version can be used.)
• IAR work bench (32K code limited version could be used.)
• Coo Cox Coide (Unlimited, open source)
• GCC based open source tool chains

Plugins/Programmers:

H-JTAG, CooCox Colink, Flash Magic have been tested.

Compatible debuggers like U-Link, J-Link etc can also be used.

Debugger/Programmer Options

• CoiNel ARM USB JTAG.
• CoiNel CooCox CoLinkEx.
• Parallel Port Debugger.

Product Ordering Code: M3-MINI

Additional Information:

• Item Code: M3-MINI
• Port of Dispatch: DTDC,DHL,FedEx
• Production Capacity: 100000
• Packaging Details: 1. LPC1768Mini Board. 2. USB Cable. 3. CD Containing schematic, sample source codes, required software and reference documents.

Approx. Rs 7,500 / Piece(s)Get Latest Price

We are involved in offering supreme quality range of LPC1788 MiO Board to our clients. This LPC1788 MiO Board is widely accepted in different industrial and commercial sectors as software tool and for application development. To avail the demand of our clients, we are providing this product at market leading prices.

Price: Rs. 7,500.00

Features of LPC1788 MiO:

• MCU: LPC1788. Package: BGA-208. Pin Compatible with LPC2478/LPC1788
• External SDRAM – MT48LC64M4A2 (256 MBits X 2)
• FLASH – AT25DF641, Interface – SPI (optional)
• 20 PIN 2.54 mm JTAG Header, 10 pin 1.27mm SWD/JTAG Connectivity options
• On Board Reset and ISP
• On Board 12 Mhz Clock
• On Board 32.768 Khz Clock for RTC
• MicroSD Card Interface via MCI
• Option to connect Graphical LCD (TM12864H6CCOWA)
• On Board Test LED and Buzzer
• USB Device (USB1)
• USB Host (USB1 and USB2)
• On Board POT connected via ADC 0.0
• On Board CAN Transceiver (MCP2551) – CAN1
• 2 x UART (RS232) – UART0 and UART2 TTL Outputs for UART0 and UART2
• On Board PS2 Keyboard Connectivity Option
• Two switches via GPIO
• Ethernet Connectivity via DP83848 PHY
• 40 PIN TFT (24 Bit datalines) Header including SPI and I2C on same header
• Audio Amplifier. Connected via DAC Out with 3.5mm audio jack.
• Pin Outs for GPIO including I2c, SPI, ADC etc
• Internal RTC with CMOS Battery (2032) Connectivity Options.
• On Board Power Supply for 5V and 3.3V

Display Options for LPC1788 MiO:

3.2inch TFT with touch Connectivity

• Model: KWH032GM02-F05
• Interface : Parallel (connected to RX62N Board via 40 PIN flat Cable).
• Number of Pixels: 320 x 240

Note: SPI interface can also be used. Driver IC: ILI9341. (Connection has to be taken through single wires and connected to MiO Board)

3.5inch TFT with touch Connectivity:

• Model: TM035KBH02
• Interface : Parallel (connected to RX62N Board via 40 PIN flat Cable).
• Number of Pixels: 320 x 240

Note: SPI interface can also be used. Driver IC: Novatek NT39016D. (Connection has to be taken through single wires and connected to RX62N Board)

Tested through: Internal TFT Driver

4.3 inch TFT with touch Connectivity:

• Model: TM043NBH02
• Interface : Parallel (connected to RX62N Board via 40 PIN flat Cable).
• Number of Pixels: 480 x 272

4.3 inch TFT with Touchscreen(SPI):

LPC1788 Features:

• ARM Cortex M3 Core
• Upto 120 MHz Operation
• Nested Vector Interrupt Controller (NVIC) for fast deterministic interrupts.
• Wakeup Interrupt Controller allows automatic wakeup from any priority interrupts.
• Memory Protection Unit
• Four reduced power modes – sleep, deep sleep, power down, deep power down.

PRODUCT ORDERING CODE: 1788-MiO

Additional Information:

• Item Code: M3-1788-MiO
• Port of Dispatch: DTDC,DHL,FedEx
• Production Capacity: 1000
• Packaging Details: 1. LPC1788 MiO 2. 128x64 GLCD (TM12864H6CCOWA) 3. USB A to B Cable 4. 7.5 V/1Amp Adapter CD Containing schematic, source codes, software, documentation and related details.

Approx. Rs 2,500 / PieceGet Latest Price

We are counted as prominent name in this domain, involved in offering supreme quality range of LPC4088 Header Board to our clients. This LPC4088 Header Board is made with fine quality of material and liable to perform its working for long period of time. Our product is widely appreciated for its easy operations and trouble free performance.

Prices: Rs. 2,500.00

PRODUCT DESCRIPTION:

LPC4088H is a Header Board designed for CORTEX M4 Based LPC4088 Controller from NXP. The Board is a basic IO Pinout Board with options of onboard power and USB Device. Remaining IO pins are taken out on 2.54 mm berg connector. The board has standard JTAG Connectivity for debug/programming.

FEATURES:

• Controller: CORTEX M4 Based LPC4088 from NXP
• Package: LQFP208
• Clock Used: 12MHz for Controller, 32.768KHz for internal RTC
• Power: On Board, 5V and 3.3V
• On Board reset and ISP switches
• JTAG Connectivity Option
• Test LED via IO Pin
• On Board USB Device
• Can be USB or external Powered
• 106 x 65 mm

• No of Layers: 2
• FR4, Blue Solder Mask, ENIG, 1.6mm thickness

• Parallel Port JTAG (tested on Keil uvision4.53 IDE, Rowley Crossworks)
• CoiNel ARM USB JTAG (tested on Rowley CrossWorks)
• The Board can also be used with other compatible JTAG Debuggers
• The details on how to use the JTAG and its associated plugins are provided with the documents and also can be downloaded from Download and Support sections

ISP Programming:

• Programming can be done through the on chip boot loader using UART interface (UART0). You will have to use a TTL to RS232 Converter to do so since the pinout are TTL logic and PC uses RS232 logic. The tool used for programming is Flash Magic

Tools:

Our products can be used with majority of IDE and plugins that support ARM7 LPC2000 family. A few IDE and plugin details are given below

• Keil uvision4.53 IDE (32K code limited version can be used. Use 4.53 and above)
  
• Rowley Crossworks(30 day evaluation version can be used.)
  
• IAR workbench (32K code limited version could be used.)

Kit Deliverables:

• LPC4088 Header Board
• USB Cable
• CD Containing schematic, sample source codes, required software and reference documents.

PRODUCT ORDERING CODE: LPC4088H

• LPC4088 Block Diagram

Additional Information:

• Item Code: M4-LPC4088H
• Port of Dispatch: DTDC,DHL,FedEx
• Production Capacity: 1000
• Packaging Details: 1. LPC4088 Header Board 2. USB Cable 3. CD Containing schematic, sample source codes, required software and reference documents.